MetaLIGHT 650SV
High Performance Ethernet Switch for Legacy T1s and E1s Over Fiber
A Comprehensive Solution for Consolidating TDM
and Ethernet/IP Services into a Single, Efficient Platform
A Comprehensive Solution for Consolidating TDM and Ethernet/IP Services into a Single, Efficient Platform
Engineered to facilitate the seamless migration of TDM services to modern fiber-based packet-switched networks
The MetaLIGHT 650SV ensures uninterrupted service by preserving the timing, synchronization, and reliability required for TDM applications. It facilitates a smooth transition from legacy TDM to IP networks without compromising service quality.
Designed with Pseudowire Emulation (PWE) capabilities, the ML650SV exclusively transmits all Ethernet and TDM traffic over fiber connections.
The ML650SV features Comprehensive Circuit Emulation Service (CES) protocol support and a carrier-grade, compact design with six versatile ports (Two 1G SFPs for fiber connections, four 10/100 Base-T RJ-45 ports for Ethernet, and four T1/E1 interfaces for legacy service continuity.)
1G
Uplinks
4 Ethernet Ports
2 SFP Ports
4 T1/E1 Interfaces
Harsh
Environments
High Reliability &
Availability
Ultra-
secure
Key Features
- Superior Reliability
- Rapid Service Deployment
- T1/E1 Replacement with High Precision Synchronization
- MEF 9, 14, 8, 18 certified
- Low CESoETH Delay
- Low Delay and Jitter for Voice and Video Transmission
- Carrier Class OAM - Y.1731, CFM
- NEBS III, FCC, UL, CE
- Environmentally Hardened
Applications
- 4G LTE backhaul
- WiMAX backhaul
- WiFi backhaul
- Leased Lines Upgrade or Cost Effective Alternative
- Seamless Migration from all TDM to all Ethernet / Packet
- DSLAM, MSAP, BLC backhaul
- PBX backhaul
Markets Served
- Telecommunications Operators (Residential Broadband, Business Ethernet)
- Alternative Carriers
- Mobile Operators
- Federal Government Agencies
- State & Local Government Agencies
- Education
- Health Care
- Utilities
- Private Campuses
Rapid service delivery over a unified Ethernet network with seamless support for legacy TDM systems
Product Name | High Level Description |
|---|---|
ML650SV Part Number 501RG0078 | 6-Port Hardened Managed Ethernet Fiber Switch 1G Uplinks Ethernet Interfaces: 10/100Base-T: 4 ports, Connector: RJ45, Auto-MDIX 100Base-FX/1000Base-FX: 2 ports, Connector: SFP based, MSA compliant TDM Interfaces: T1/E1: 4 ports Connector: RJ45/RJ48c Synchronization: Clock Source: T1/E1, BITS-2MHz external clock Synchronous Ethernet over copper or fiber, Adaptive Timing Extended Temperature: -40°C ~ 65°C (-40°F ~ 149°F) Power Inputs: –48/-60 VDC nominal,<22 Watt, Optional AC |
Summary of Specifications
- Ethernet (Network/User)
- 10/100 Base-T: 4 ports
- Connector: RJ45, Auto-MDIX
- 100Base-FX Connector/1000Base-FX: 2 ports
- Connector: SFP Based, MSA compliant
- 10/100 Base-T: 4 ports
- TDM
- T1/E1
- 4 ports Connector: RJ45/RJ48c Standards Compliance ITU-T G.703 + G.704 Short & Long
- Line Codes: ITU-T G.703, G.704, GR-499, ANSI-T1.403, ANSI-T1.102
- Framing: Unframed / Framed / Fractional
- Service Loopback: Facility and
Equipment Construction
- T1/E1
- TDM Synchronization
- Clock Source: T1/E1, BITS-2MHz external clock; Synchronous Ethernet over copper or fiber, Adaptive Timing
- Clock: Accuracy ±50ppb
- Clock Holdover: Stratum 3, GR-1244 Type II and G.813
- Clock Jitter: ITU-T G.823/G.824 SSU
- Clock APS: Automatic Protection Switch from Primary to Secondary as specified in GR-1244-CORE TDM Protocols
- ITU-T: G.703, G.704, GR-499-CORE, GR-253-CORE
- CES Protocols
- CESoETH: According to MEF 8
- CESoPSN: According to IETF RFC 5086
- SAToP: According to IETF RFC4553
- CES Delay: < 5 ms
- Management
- 10/100Base-T Connector: RJ45, Auto-MDIX
- Craft EIA RS-232 (DCE) Connector DB9
- Dynamic Bridging IEEE 802.1, 8K MAC addresses
- Discovery Mechanisms: LLDP
- VLAN Tagging: IEEE 802.1Q
- Double Tagging: Q-in-Q
- RSTP, STP: IEEE 802.1d
- Link Aggregation: IEEE 802.3ad
- Provider Bridges: IEEE 802.1ad
- IGMP snooping: IGMP v1/v2
- OAM: IEEE 802.1ag, ITU Y.1731, Ethernet loopback
with MAC swap
- Applications
- EMS MetaASSIST EMS
- Craft GUI MetaASSIST View
- Protocols
- ITU-T G.826 Performance Monitoring for Line and Path
- ITU-T G.704/G.707 Synchronization Status Message
- SNMP: SNMP V3, V2C, V1
- IP addresses: IPV4 and IPV6
- Command Line Interface TL1, Industry Standard CLI
- Remote Access Telnet
- Secure Access (option) SSH v2
- Time Synchronization SNTP v3
- File Transfer FTP, TFTP
- IEEE 802.3ah EFM OAM: Dying Gasp
- User Authentication RADIUS and/or local passwords
- Quality of Service
- Classes of Service: 4
- Scheduler: WFQ, SP
- Classification: L2 802.1p/Q priorities,
L3 ToS/Diff Serv
- Power
- Status
- Alarm
- Synch
- MLP per modem/pair
- ACT (Activity) per Ethernet/HSL port
- LNK (Link) per Ethernet/HSL/T1/E1 port
- ERR (Error) Alarm per T1/E1/External Clock port
- Terminal Block: 2 Input, 1 Output
- Dimensions
- Height: 1.6” / 40 mm (1U)
- Depth: 11.0” / 280 mm
- Width: 8.4” / 213 mm
- Weight: 3.75 lbs / 1.7 kg
- Mounting Rack:
- 2 units in 19”, 23” or ETSI racks
- Desktop, Wall Mount
- Power:
- -48/-60 VDC nominal, <22 Watt
- AC: 90-264 VAC, 47-63 Hz, 25-30 Watt (per model)
- Operating Temp.: -40° to +65°C (-40° to 149°F)
- Storage Temp.: -40° to +75°C (-40° to 167°F)
- Relative humidity: Up to 95%, non-cond.
- Metro Ethernet Forum: CE1.0 – MEF 9, 14, 18
- Safety:
- UL 60950, CSA C22.2 60950-1
• EN 60950-1, IEC 60950-1
- UL 60950, CSA C22.2 60950-1
- EMC:
- FCC Part 15 Class B; ICES-003 Class B
- ETSI EN 300 386 Class B
- ETSI ETS 300 132-2
- ITU-T K20, K.21
- NEBS
- Level III (GR-1089-CORE, GR-63-CORE)
- CE: EMC and Safety
- Environmental:
- GR-63-CORE
- ETSI ETS 300 019
Actelis Solutions
Managed Ethernet Switches
Industrial Ethernet
