GigaLine 9104C

Delivers instant Gigabit connectivity in Small to Medium MDUs over existing coax infrastructure

PON Extender, G.hn wave2, Indoor Aggregation Unit
with Integrated G.hn/Wi-Fi End Point

Reach up to 64 MDU subscribers instantly with Gigabit services

Designed specifically to deliver connectivity in small to medium multi-dwelling units (MDUs), the GigaLine 9104C solution is an ideal solution for instant distribution of 1 Gbps services reaching up to 64 MDU subscribers over existing coax infrastructure. Because the GL9104C utilizes the existing coax in the walls of the building, it is an extremely cost-effective, low entry cost solution allowing you to achieve an ultra-fast return on investment.

Low Entry Cost, Scalable To Meet Future Demands

The GigaLine 9104C features an integrated Layer 2 switch with four G.hn coax ports and one 2.5/1 Gbps SFP/RJ-45 uplink, delivering a flexible solution for MDUs, hotels, sports venues, education, and other multi-tenant environments. It enables high-performance, 1 Gbps high-speed distribution of video, data, and voice over existing coax infrastructure.

The solution offers not only a low initial cost but also a highly adaptable platform that allows operators to adjust to site-specific requirements when more than 16 endpoints share the same coax network. The GL9104C supports flexible port grouping (2, 3, or 4 ports) to match existing building infrastructure, enabling connectivity for up to 64 subscribers within the same coax domain.

Integrated G.hn WiFi 6 Access Point

The GL9104C pairs with our GL93C-W Wi-Fi customer endpoint, offering the seamless, integrated solution you need to tackle on MDU implementations. The GL93C-W is unique as it combines the G.hn CPE and a Wi-Fi 6 Access Point in a single unit. GL93C bridge end point unit can be also used as CPE.

2.5 Gbps needle

2.5G
Uplinks

Adaptable - GL9104C

Adaptable
# of EP per Coax D omain

Power saving

Ultra-Low Power Consumption

Ultra-Low
Power Consumption

Reuse icon_noun-reuse-1929746

Reuse the Existing Building Wiring

Reuse the Existing
Building Wiring

noun-security-2055625

Secure, Encrypted Solution

Secure, Encrypted
Solution

Key Features

Start Connecting MDUs Today With GL9104C

GL9104C Aggregation Unit Specifications

Product Name
High Level Description
GL9104C
Indoor Aggregation Unit
PON Extender G.hn Wave2 Aggregation Unit
Interfaces:
Uplinks: 1 x 2.5 Gbps port for uplink, SFP or RJ-45
Downlinks (towards subscribers): 4 x G.hn over coax ports , 1.7Gbps
Dimensions: 228.1mm(W) x 143.5mm(D) x 40.6mm (H); 8.9″(W) x 5.65″(D) x 1.6″(H)
Operating Temperature: 0°C ~ 50°C (32°F ~ 122°F)
Power Inputs: Power adaptor AC to DC – 90~264VAC 50~60Hz to 12V/2A
Power Consumption:
Max 18 watts
GL93C-W
Wi-Fi Customer unit /
End Point
Integrated G.hn and Wi-Fi Customer unit /End Point
Interfaces:
Network Interface: G.hn over coax, Coax port, F-type connector
Local (LAN) Network Interfaces: 2x 10/100/1000BaseT Ethernet ports. (RJ45)
Wireless Interfaces: WiFi6 IEEE 802.11a/b/g/n/ac/ax
Dimensions:
145mm(W) x 80mm(D) x 210mm(H); 5.7″(W) x 3.46″(D) x 8.27″(H)
Operating Temperature: 0°C ~ 40°C (32°F ~ 104°F)
Power Inputs: Power adaptor AC to DC – 90~264VAC 50~60Hz
Power Consumption:
Idle: 8.2W, Typ.: 11W, Max: 16.2W
GL93C
Customer unit /
End Point
G.hn Customer unit /End Point
Interfaces:
Network Interface: G.hn over coax, Coax port, F-type connector
Local (LAN) Network Interfaces: 2x 10/100/1000BaseT Ethernet ports. (RJ45)
Dimensions:
130mm(W) x 80mm (D) x 25 mm (H); 5.1″(W) x 3.14″(D) x 0.98″(H)
Operating Temperature: 0°C ~ 40°C (32°F ~ 104°F)
Power Inputs (power adaptor): AC to DC – 90~264VAC 50~60Hz, 12VDC /1A

GL910C Aggregation Unit Specifications

  • Network Uplink
    • 1 x 2.5 Gbps ports for uplink, SFP or RJ-45
    • Active Ethernet OR GPON/EPON via external ONU/ONT
  • Toward Subscribers (downlink)
    • 4 x 1/2.5 Gbps G.hn over coax ports 
    • Each G.hn coax port can support up to 1.7Gbps, 16 subscribers
    • G.hn coax ports can be grouped to support up to 64 EP per single coax domain
  • Management Interfaces
    • Reset Button – Factory default or restart
  • G.hn over Coax:
    • Ports 1-4, Coax (F-type connector)
  • G.hn Wave-2:
    • ITU-T Standards: G.9960/1, G.9962 Management, G.9964 compliant
    • Up to 1.7 Gbps with Dynamic Time Allocation to optimize throughput
    • Frequency Band: Supports OFDM 200 MHz
  • Topologies supported: Point-to-MultiPoint – up to 16 subscribers per G.hn port, up to 64 subscribers with 4 port grouping
  • Ease of Operation: Firmware downloads and configuration for end units
  • Security: Encryption AES-128
  • Spanning Tree Protocol: STP/RSTP/MSTP IEEE 802.1d/ 802.1w/IEEE 802.1s 
  • MAC Table:
    • Up to 32K MAC addresses
  • Jumbo Frame: 10240 bytes
  • Link Aggregation Control Protocol (LACP): IEEE 802.3ad for any SFP+ (uplink) ports
  • VLANS:
    • Supports up to 4K VLANs simultaneously
    • VLAN supported: Port-based VLAN; IEEE 802.1Q tag-based VLAN; IEEE802.1ad (Q-in-Q) double tag; MAC-based VLAN; Management VLAN
  • IGMP: v2/v3 Snooping
  • DHCP:
    • DHCP for dynamic IP addresses, DHCP Snooping
    • DHCP Relay By supporting DHCP option 82
  • Quality of Service
    • Eight hardware queues per port
    • Scheduling Strict Priority and Weighted Round-Robin (WRR)
    • Queue assignment: Port based; 802.1p VLAN priority based; IPv4/IPv6precedence / Type of Service (ToS)
    • QoS Rate Limiting Ingress/Egress
  • Management: Telnet; SSH, HTTP/S, SNMP
  • Web GUI Interface: HTTP/ HTTPS – Easy-to-use dashboard for configuration, maintenance, and monitoring
  • Firmware Upgrade
    • Web browser upgrade HTTP or TFTP
    • Dual Firmware Image
  • IPv4 and IPv6: Support both
  • SNMP: SNMP V1/2c/3, Support for traps
  • Remote Monitoring (RMON): RMON groups 1,2,3,9 (history, statistics, alarms & events)
  • Port Mirroring: Mirroring per port, Multiple ports
  • Network Timing Protocol: Simple Network Time Protocol (SNTP)
  • Discovery Link Layer Discovery Protocol (LLDP): IEEE 802.1ab
  • ACL: ACL per MAC, VLAN, and IP based
  • Monitoring: CPU Usage, Memory Usage; Temperature & Voltage monitoring
  • Power LED
    • Off: power off or fail
    • On Green: power on
  • Status (System) LED
    • SYS: Green LED
    • Off: power off/fail
    • On Green: System is ready
    • Blinking: System booting up
  • Alarm LED
    • Off: No Faults
    • On Red: Alarm – system failure, overhead, wrong voltage
  • Coax ports LED: 
    • Off: power off
    • Green solid: G.hn link PHY rate is above 300Mbps and no data traffic in G.hn link.
    • Green blinking: sending or receiving data
    • Amber solid: G.hn link PHY rate is between 300 Mbps and 100 Mbps, and no data traffic in G.hn link.
    • Amber blinking: sending or receiving data
    • Red Solid: G.hn link PHY rate is below 100Mbps and no data traffic in G.hn link.
    • Red blinking: sending or receiving data)
  • Ethernet Port LED
    • Off: port disconnected or link fail
    • Green ON: 100/1000/2500Mbps connected
    • Blinking: sending or receiving data
  • SFP Port LED: Link/ACT
    • Off: disconnected or link fail
    • Green: 1000/2500Mbps connected
    • Blinking: sending or receiving data
  • Reset Button
    • Push for six seconds to load the default setting
  • CE Mark, FCC Part 15 Class A
  • UL compliant
  • Input: Power Adaptor AC to DC 90~264VAC 50~60Hz. Power consumption < 18W
  • Dimensions (inch/mm):
    • Width: 228.1mm / 8.9″
    • Depth: 143.5mm / 5.65″
    • Height: 40.6mm / 1.6
  • Temperature: 
    • Operating Temperature: 0°C ~ 50°C (32°F ~ 122°F)
    • Storage Temperature: -20°C ~ 70℃ (-4°F ~ 158°F)
  • Relative humidity:
    • Operating: 10% ~ 85% RH (non-condensing)
    • Storage: 5% ~ 90% RH (non-condensing)

GL93C-W Integrated G.hn and
Wi-Fi Customer Unit/End Point Specifications

GL93C-W Integrated G.hn and Wi-Fi Customer Unit/End Point Specifications

  • Network Interface (WAN)
    • G.hn over coax, Coax port, F-type connector
    • Compliant with the ITU-T G.hn G.9960 / G.9961 / G.9962 / G.9964
    • Up to 1.7Gbps, Frequency 2~200MHz, Range 500 meters
  • Local (LAN) Network Interfaces
    • 2x 10/100/1000BaseT Ethernet ports (RJ45)
  • Wireless Interfaces
    • WiFi6 IEEE 802.11a/b/g/n/ac/ax
    • 2.4GHz & 5GHz, Dual-band dual-concurrent (DBDC), Internal antennas
  • Other Interfaces
    • Coax Port, TV Out, F-type connector
  • Management Interfaces
    • Operating Modes: Router / Access Point / Bridge
  • G.hn Wave-2:
    • ITU-T Standards : G.9960, G.9961, G.9962 Management, G.9964 compliant
    • Up to 1.7 Gbps with Dynamic Time Allocation to optimize throughput
    • Frequency Band: Supports OFDM 200 MHz
  • Topologies supported
    • End point in a Point-to-MultiPoint topology, GL910C as headend
  • Security
    • Encryption AES-128
  • Wi-Fi Standards
    • IEEE 802.11 a/b/g/n/ac/ax (Wi-Fi 4/5/6)
    • Supports Mesh Wi-Fi 
  • Frequency Bands
    • 2.4 GHz: Up to 574 Mbps (20/40 MHz channels)
    • 5 GHz: Up to 1201 Mbps (40/80 MHz channels)
  • MIMO & Antenna Configuration
    • MIMO: 2×2 MU-MIMO
    • Antenna Type: 2 Internal
  • DFS Support
    • Yes – Zero-Wait DFS
  • Channel Bandwidth
    • 2.4 GHz: 20/40 MHz
    • 5 GHz: 40/80 MHz
  • SSID
    • Up to 4 SSIDs
  • Wireless Security
    • WPA/WPA2/WPA3-Personal
    • Wi-Fi Protected Setup (WPS)
  • VLANS
    • Optional VLAN per SSID and per Ethernet port
  • DHCP
    • DHCP Server
    • DHCP Client
  • Quality of Service
    • Supported
  •  
  •  
  • Remote Management
    • Full remote management through GL910C aggregator
  • Web GUI Interface
    • HTTP
  • Firmware Upgrade
    • Locally, through GL910C
  • IPv4 and IPv6
    • Dual Stack
  • Statistics
    • TX, RX bytes and packets on all ports
  • LAN and SFP LEDs
    • LAN1: On – Green
    • LAN2: On – Green
  • Wireless LED
    • On Green, WLAN is ready
  • G.hn link LED
    • On – Color represents G.hn connection BW
      • Green: PHY rate > 300Mbps
      • Amber: PHY rate 100 ~ 300Mbps
      • Red: PHY rate < 100Mbps
  • Power
    • Green: Power on
  • POWER On/off button
    • Off: Power off or fail
  • Buttons (Front)
    • WPS: Press to begin Wi-Fi Protected Setup (WPS) procedure
    • RESET: Restore to default settings
    • PAIR: Not applicable (only for G.hn Home Networking)
  • Interfaces
    • LAN2: Ethernet 100/1000BaseT
    • LAN1: Ethernet 100/1000BaseT
    • COAX: G.hn based WAN port
    • TV: TV out signal to a TV
    • POWER IN: 12V DC power adapter
  • CE Mark, FCC Part 15 Class A
  • UL compliant
  • Input: On/off button
  • 90~264VAC 50~60Hz
  • Power consumption: Idle: 8.2W, Typ.: 11W, Max: 16.2W
  • Dimensions (L x W x H) w/stand:
    • 145 × 80 × 210 mm (5.7″ x 3.46″ x 8.27″)
    • Depth: 5.15” / 131 mm
    • Width: 17.3” / 441 mm
  • Installation
    • Desktop Unit
  • Fan: 1x fan
  • Temperature: 
    • Operating Temperature: 0°C ~ 40°C (32°F ~ 104°F)
    • Storage Temperature: -10°C ~ 60℃ (-14°F ~ 140°F)
  • Relative humidity:
    • Operating: 80% RH (non-condensing)

GL93C G.hn Customer Unit/End Point Specifications

GL93C-W Integrated G.hn and Wi-Fi Customer Unit/End Point Specifications

  • Network Interface (WAN)
    • G.hn over coax, Coax port, F-type connector
    • Compliant with the ITU-T G.hn G.9960 / G.9961 / G.9962 / G.9964
    • Up to 1.7Gbps, Frequency 2~200MHz, Range 500 meters
  • Local (LAN) Network Interfaces
    • 2x 10/100/1000BaseT Ethernet ports (RJ45)
  • Other Interfaces
    • Coax Port, TV Out, F-type connector
  • Management Interfaces
    • Operating Modes: Router / Access Point / Bridge
  • G.hn Wave-2:
    • ITU-T Standards : G.9960, G.9961, G.9962 Management, G.9964 compliant
    • Up to 1.7 Gbps with Dynamic Time Allocation to optimize throughput
    • Frequency Band: Supports OFDM 200 MHz
  • Topologies supported
    • End point in a Point-to-MultiPoint topology, GL9110C or GL9104C as headend
  • Security
    • Encryption AES-128
  • VLANS
    • Controlled through the GL9000C aggregation switches
  • DHCP
    • DHCP Client
  •  
  •  
  • Remote Management
    • Full remote management through GL900oC aggregation switches
  • Web GUI Interface
    • HTTP
  • Firmware Upgrade
    • Through GL9000C aggregation switches
  • IPv4 and IPv6
    • Dual Stack
  • IGMP Snooping
    • Supports IPv4 IGMP snooping and Ipv6 MLD
  • Statistics
    • TX, RX bytes and packets on all ports
  • LAN LEDs
    • GREEN for LAN 2; RED for LAN 1
    • Green SOLID: LAN 2 Ethernet link detected.
    • Green BLINKING: LAN 2 Ethernet link is active
    • Red SOLID: LAN 1 Ethernet link detected.
    • Red BLINKING: LAN 1 Ethernet link is active.
    • OFF: No Ethernet link detected
  • G.hn link LED
    • On – Color represents G.hn connection BW
      • Green: PHY rate > 300Mbps
      • Amber: PHY rate 100 ~ 300Mbps
      • Red: PHY rate < 100Mbps
  • Power
    • Green: Power on
  • Buttons (Front)
    • RESET: Restore to default settings
    • PAIR: Not applicable (only for G.hn Home Networking)
  • Interfaces
    • LAN2: Ethernet 100/1000BaseT
    • LAN1: Ethernet 100/1000BaseT
    • COAX: G.hn based WAN port
    • TV: TV out signal to a TV
    • POWER IN: 12V DC power adapter
  • CE-EMC, CE-LVD, FCC Part 15 Class B
  • UL compliant
  • ROHS and WEEE compliant

  • Power in – AC/DC Adaptor, DC Jack
  • DC 12v/1A
  • Dimensions (L x W x H) :
    • 130 x 80  x 25  mm ; 5.1 x 3.14 x 0.98 inch
  • Installation
    • Desktop Unit
  • Temperature: 
    • Operating Temperature: -10 ~ 40℃ (14°F ~ 104°F)
      • Storage Temperature: –20 °C to 70 °C (-4°F ~ 158°F)
  • Relative humidity:
    • Operating: 10 ~ 85% RH (non-condensing)

Similar Product

Compact, ultra-low power, intelligent PON/Gigabit fiber extender/splitter
over copper or coax built to server small to medium sized MDUs.

Actelis Solutions

Managed Ethernet Switches

Industrial Ethernet

Ethernet Extenders

Management & Security

Contact Me

Learn how the GigaLine 9000 delivers
instant Gigabit connectivity in large MDUs