GigaLine 9104C
Delivers instant Gigabit connectivity in Small to Medium MDUs over existing coax infrastructure
PON Extender, G.hn wave2, Indoor Aggregation Unit
with Integrated G.hn/Wi-Fi End Point
Reach up to 64 MDU subscribers instantly with Gigabit services
Designed specifically to deliver connectivity in small to medium multi-dwelling units (MDUs), the GigaLine 9104C solution is an ideal solution for instant distribution of 1 Gbps services reaching up to 64 MDU subscribers over existing coax infrastructure. Because the GL9104C utilizes the existing coax in the walls of the building, it is an extremely cost-effective, low entry cost solution allowing you to achieve an ultra-fast return on investment.
Low Entry Cost, Scalable To Meet Future Demands
The GigaLine 9104C features an integrated Layer 2 switch with four G.hn coax ports and one 2.5/1 Gbps SFP/RJ-45 uplink, delivering a flexible solution for MDUs, hotels, sports venues, education, and other multi-tenant environments. It enables high-performance, 1 Gbps high-speed distribution of video, data, and voice over existing coax infrastructure.
The solution offers not only a low initial cost but also a highly adaptable platform that allows operators to adjust to site-specific requirements when more than 16 endpoints share the same coax network. The GL9104C supports flexible port grouping (2, 3, or 4 ports) to match existing building infrastructure, enabling connectivity for up to 64 subscribers within the same coax domain.
Integrated G.hn WiFi 6 Access Point
The GL9104C pairs with our GL93C-W Wi-Fi customer endpoint, offering the seamless, integrated solution you need to tackle on MDU implementations. The GL93C-W is unique as it combines the G.hn CPE and a Wi-Fi 6 Access Point in a single unit. GL93C bridge end point unit can be also used as CPE.
2.5G
Uplinks
Adaptable
# of EP
per Coax D
omain
Ultra-Low Power Consumption
Ultra-Low
Power Consumption
Reuse the Existing Building Wiring
Reuse the Existing
Building Wiring
Secure, Encrypted Solution
Secure, Encrypted
Solution
Key Features
- No need to rewire the building
- Serves up to 64 customers over the same coax domain
- Scalable solution to meet future growth
- Easy deployment / configuration
- 4 x G.hn Coax ports (downlinks)
- 1 x 2.5/1 Gbps SFP or RJ-45 uplink
- Advanced L2 switching
- Combined G.hn CPE and Wi-Fi 6 Access Point in a single unit
- Fully Managed, Web UI, SNMP
- AES-128 Encryption
- Superior Reliability and Availability
GL9104C Aggregation Unit Specifications
Product Name | High Level Description |
|---|---|
GL9104C Indoor Aggregation Unit | PON Extender G.hn Wave2 Aggregation Unit Interfaces: Uplinks: 1 x 2.5 Gbps port for uplink, SFP or RJ-45 Downlinks (towards subscribers): 4 x G.hn over coax ports , 1.7Gbps Dimensions: 228.1mm(W) x 143.5mm(D) x 40.6mm (H); 8.9″(W) x 5.65″(D) x 1.6″(H) Operating Temperature: 0°C ~ 50°C (32°F ~ 122°F) Power Inputs: Power adaptor AC to DC – 90~264VAC 50~60Hz to 12V/2A Power Consumption: Max 18 watts |
GL93C-W Wi-Fi Customer unit / End Point | Integrated G.hn and Wi-Fi Customer unit /End Point Interfaces: Network Interface: G.hn over coax, Coax port, F-type connector Local (LAN) Network Interfaces: 2x 10/100/1000BaseT Ethernet ports. (RJ45) Wireless Interfaces: WiFi6 IEEE 802.11a/b/g/n/ac/ax Dimensions: 145mm(W) x 80mm(D) x 210mm(H); 5.7″(W) x 3.46″(D) x 8.27″(H) Operating Temperature: 0°C ~ 40°C (32°F ~ 104°F) Power Inputs: Power adaptor AC to DC – 90~264VAC 50~60Hz Power Consumption: Idle: 8.2W, Typ.: 11W, Max: 16.2W |
GL93C Customer unit / End Point | G.hn Customer unit /End Point Interfaces: Network Interface: G.hn over coax, Coax port, F-type connector Local (LAN) Network Interfaces: 2x 10/100/1000BaseT Ethernet ports. (RJ45) Dimensions:130mm(W) x 80mm (D) x 25 mm (H); 5.1″(W) x 3.14″(D) x 0.98″(H) Operating Temperature: 0°C ~ 40°C (32°F ~ 104°F) Power Inputs (power adaptor): AC to DC – 90~264VAC 50~60Hz, 12VDC /1A |
GL910C Aggregation Unit Specifications
- Network Uplink
- 1 x 2.5 Gbps ports for uplink, SFP or RJ-45
- Active Ethernet OR GPON/EPON via external ONU/ONT
- Toward Subscribers (downlink)
- 4 x 1/2.5 Gbps G.hn over coax ports
- Each G.hn coax port can support up to 1.7Gbps, 16 subscribers
- G.hn coax ports can be grouped to support up to 64 EP per single coax domain
- Management Interfaces
- Reset Button – Factory default or restart
- G.hn over Coax:
- Ports 1-4, Coax (F-type connector)
- G.hn Wave-2:
- ITU-T Standards: G.9960/1, G.9962 Management, G.9964 compliant
- Up to 1.7 Gbps with Dynamic Time Allocation to optimize throughput
- Frequency Band: Supports OFDM 200 MHz
- Topologies supported: Point-to-MultiPoint – up to 16 subscribers per G.hn port, up to 64 subscribers with 4 port grouping
- Ease of Operation: Firmware downloads and configuration for end units
- Security: Encryption AES-128
- Spanning Tree Protocol: STP/RSTP/MSTP IEEE 802.1d/ 802.1w/IEEE 802.1s
- MAC Table:
- Up to 32K MAC addresses
- Jumbo Frame: 10240 bytes
- Link Aggregation Control Protocol (LACP): IEEE 802.3ad for any SFP+ (uplink) ports
- VLANS:
- Supports up to 4K VLANs simultaneously
- VLAN supported: Port-based VLAN; IEEE 802.1Q tag-based VLAN; IEEE802.1ad (Q-in-Q) double tag; MAC-based VLAN; Management VLAN
- IGMP: v2/v3 Snooping
- DHCP:
- DHCP for dynamic IP addresses, DHCP Snooping
- DHCP Relay By supporting DHCP option 82
- Quality of Service
- Eight hardware queues per port
- Scheduling Strict Priority and Weighted Round-Robin (WRR)
- Queue assignment: Port based; 802.1p VLAN priority based; IPv4/IPv6precedence / Type of Service (ToS)
- QoS Rate Limiting Ingress/Egress
- Management: Telnet; SSH, HTTP/S, SNMP
- Web GUI Interface: HTTP/ HTTPS – Easy-to-use dashboard for configuration, maintenance, and monitoring
- Firmware Upgrade
- Web browser upgrade HTTP or TFTP
- Dual Firmware Image
- IPv4 and IPv6: Support both
- SNMP: SNMP V1/2c/3, Support for traps
- Remote Monitoring (RMON): RMON groups 1,2,3,9 (history, statistics, alarms & events)
- Port Mirroring: Mirroring per port, Multiple ports
- Network Timing Protocol: Simple Network Time Protocol (SNTP)
- Discovery Link Layer Discovery Protocol (LLDP): IEEE 802.1ab
- ACL: ACL per MAC, VLAN, and IP based
- Monitoring: CPU Usage, Memory Usage; Temperature & Voltage monitoring
- Power LED
- Off: power off or fail
- On Green: power on
- Status (System) LED
- SYS: Green LED
- Off: power off/fail
- On Green: System is ready
- Blinking: System booting up
- Alarm LED
- Off: No Faults
- On Red: Alarm – system failure, overhead, wrong voltage
- Coax ports LED:
- Off: power off
- Green solid: G.hn link PHY rate is above 300Mbps and no data traffic in G.hn link.
- Green blinking: sending or receiving data
- Amber solid: G.hn link PHY rate is between 300 Mbps and 100 Mbps, and no data traffic in G.hn link.
- Amber blinking: sending or receiving data
- Red Solid: G.hn link PHY rate is below 100Mbps and no data traffic in G.hn link.
- Red blinking: sending or receiving data)
- Ethernet Port LED
- Off: port disconnected or link fail
- Green ON: 100/1000/2500Mbps connected
- Blinking: sending or receiving data
- SFP Port LED: Link/ACT
- Off: disconnected or link fail
- Green: 1000/2500Mbps connected
- Blinking: sending or receiving data
- Reset Button
- Push for six seconds to load the default setting
- CE Mark, FCC Part 15 Class A
- UL compliant
- Input: Power Adaptor AC to DC 90~264VAC 50~60Hz. Power consumption < 18W
- Dimensions (inch/mm):
- Width: 228.1mm / 8.9″
- Depth: 143.5mm / 5.65″
- Height: 40.6mm / 1.6
- Temperature:
- Operating Temperature: 0°C ~ 50°C (32°F ~ 122°F)
- Storage Temperature: -20°C ~ 70℃ (-4°F ~ 158°F)
- Relative humidity:
- Operating: 10% ~ 85% RH (non-condensing)
- Storage: 5% ~ 90% RH (non-condensing)
GL93C-W Integrated G.hn and
Wi-Fi Customer Unit/End Point Specifications
GL93C-W Integrated G.hn and Wi-Fi Customer Unit/End Point Specifications
- Network Interface (WAN)
- G.hn over coax, Coax port, F-type connector
- Compliant with the ITU-T G.hn G.9960 / G.9961 / G.9962 / G.9964
- Up to 1.7Gbps, Frequency 2~200MHz, Range 500 meters
- Local (LAN) Network Interfaces
- 2x 10/100/1000BaseT Ethernet ports (RJ45)
- Wireless Interfaces
- WiFi6 IEEE 802.11a/b/g/n/ac/ax
- 2.4GHz & 5GHz, Dual-band dual-concurrent (DBDC), Internal antennas
- Other Interfaces
- Coax Port, TV Out, F-type connector
- Management Interfaces
- Operating Modes: Router / Access Point / Bridge
- G.hn Wave-2:
- ITU-T Standards : G.9960, G.9961, G.9962 Management, G.9964 compliant
- Up to 1.7 Gbps with Dynamic Time Allocation to optimize throughput
- Frequency Band: Supports OFDM 200 MHz
- Topologies supported
- End point in a Point-to-MultiPoint topology, GL910C as headend
- Security
- Encryption AES-128
- Wi-Fi Standards
- IEEE 802.11 a/b/g/n/ac/ax (Wi-Fi 4/5/6)
- Supports Mesh Wi-Fi
- Frequency Bands
- 2.4 GHz: Up to 574 Mbps (20/40 MHz channels)
- 5 GHz: Up to 1201 Mbps (40/80 MHz channels)
- MIMO & Antenna Configuration
- MIMO: 2×2 MU-MIMO
- Antenna Type: 2 Internal
- DFS Support
- Yes – Zero-Wait DFS
- Channel Bandwidth
- 2.4 GHz: 20/40 MHz
- 5 GHz: 40/80 MHz
- SSID
- Up to 4 SSIDs
- Wireless Security
- WPA/WPA2/WPA3-Personal
- Wi-Fi Protected Setup (WPS)
- VLANS
- Optional VLAN per SSID and per Ethernet port
- DHCP
- DHCP Server
- DHCP Client
- Quality of Service
- Supported
- Remote Management
- Full remote management through GL910C aggregator
- Web GUI Interface
- HTTP
- Firmware Upgrade
- Locally, through GL910C
- IPv4 and IPv6
- Dual Stack
- Statistics
- TX, RX bytes and packets on all ports
- LAN and SFP LEDs
- LAN1: On – Green
- LAN2: On – Green
- Wireless LED
- On Green, WLAN is ready
- G.hn link LED
- On – Color represents G.hn connection BW
- Green: PHY rate > 300Mbps
- Amber: PHY rate 100 ~ 300Mbps
- Red: PHY rate < 100Mbps
- On – Color represents G.hn connection BW
- Power
- Green: Power on
- POWER On/off button
- Off: Power off or fail
- Buttons (Front)
- WPS: Press to begin Wi-Fi Protected Setup (WPS) procedure
- RESET: Restore to default settings
- PAIR: Not applicable (only for G.hn Home Networking)
- Interfaces
- LAN2: Ethernet 100/1000BaseT
- LAN1: Ethernet 100/1000BaseT
- COAX: G.hn based WAN port
- TV: TV out signal to a TV
- POWER IN: 12V DC power adapter
- CE Mark, FCC Part 15 Class A
- UL compliant
- Input: On/off button
- 90~264VAC 50~60Hz
- Power consumption: Idle: 8.2W, Typ.: 11W, Max: 16.2W
- Dimensions (L x W x H) w/stand:
- 145 × 80 × 210 mm (5.7″ x 3.46″ x 8.27″)
- Depth: 5.15” / 131 mm
- Width: 17.3” / 441 mm
- Installation
- Desktop Unit
- Fan: 1x fan
- Temperature:
- Operating Temperature: 0°C ~ 40°C (32°F ~ 104°F)
- Storage Temperature: -10°C ~ 60℃ (-14°F ~ 140°F)
- Relative humidity:
- Operating: 80% RH (non-condensing)
GL93C G.hn Customer Unit/End Point Specifications
GL93C-W Integrated G.hn and Wi-Fi Customer Unit/End Point Specifications
- Network Interface (WAN)
- G.hn over coax, Coax port, F-type connector
- Compliant with the ITU-T G.hn G.9960 / G.9961 / G.9962 / G.9964
- Up to 1.7Gbps, Frequency 2~200MHz, Range 500 meters
- Local (LAN) Network Interfaces
- 2x 10/100/1000BaseT Ethernet ports (RJ45)
- Other Interfaces
- Coax Port, TV Out, F-type connector
- Management Interfaces
- Operating Modes: Router / Access Point / Bridge
- G.hn Wave-2:
- ITU-T Standards : G.9960, G.9961, G.9962 Management, G.9964 compliant
- Up to 1.7 Gbps with Dynamic Time Allocation to optimize throughput
- Frequency Band: Supports OFDM 200 MHz
- Topologies supported
- End point in a Point-to-MultiPoint topology, GL9110C or GL9104C as headend
- Security
- Encryption AES-128
- VLANS
- Controlled through the GL9000C aggregation switches
- DHCP
- DHCP Client
- Remote Management
- Full remote management through GL900oC aggregation switches
- Web GUI Interface
- HTTP
- Firmware Upgrade
- Through GL9000C aggregation switches
- IPv4 and IPv6
- Dual Stack
- IGMP Snooping
- Supports IPv4 IGMP snooping and Ipv6 MLD
- Statistics
- TX, RX bytes and packets on all ports
- LAN LEDs
- GREEN for LAN 2; RED for LAN 1
- Green SOLID: LAN 2 Ethernet link detected.
- Green BLINKING: LAN 2 Ethernet link is active
- Red SOLID: LAN 1 Ethernet link detected.
- Red BLINKING: LAN 1 Ethernet link is active.
- OFF: No Ethernet link detected
- G.hn link LED
- On – Color represents G.hn connection BW
- Green: PHY rate > 300Mbps
- Amber: PHY rate 100 ~ 300Mbps
- Red: PHY rate < 100Mbps
- On – Color represents G.hn connection BW
- Power
- Green: Power on
- Buttons (Front)
- RESET: Restore to default settings
- PAIR: Not applicable (only for G.hn Home Networking)
- Interfaces
- LAN2: Ethernet 100/1000BaseT
- LAN1: Ethernet 100/1000BaseT
- COAX: G.hn based WAN port
- TV: TV out signal to a TV
- POWER IN: 12V DC power adapter
- CE-EMC, CE-LVD, FCC Part 15 Class B
- UL compliant
- ROHS and WEEE compliant
- Power in – AC/DC Adaptor, DC Jack
- DC 12v/1A
- Dimensions (L x W x H) :
- 130 x 80 x 25 mm ; 5.1 x 3.14 x 0.98 inch
- Installation
- Desktop Unit
- Temperature:
- Operating Temperature: -10 ~ 40℃ (14°F ~ 104°F)
• Storage Temperature: –20 °C to 70 °C (-4°F ~ 158°F)
- Operating Temperature: -10 ~ 40℃ (14°F ~ 104°F)
- Relative humidity:
- Operating: 10 ~ 85% RH (non-condensing)