MetaLIGHT 2300N
Compact, Mini Ethernet Aggregation Switch Supporting
Hybrid Networks of Fiber and Copper
Cost-effective Ethernet in the First Mile (EFM)
mini-aggregation solution for low-pair count and
space constrained locations.
Cost-effective Ethernet in the First Mile (EFM) mini-aggregation solution for low-pair count and space constrained locations.
The ML2300N product line offers a cost effective and rapidly deployable solution for space constrained and low density areas. The solution enables easy integration into existing carrier/enterprise networks. ML2300N simplifies deployment, provisioning and troubleshooting to enable high service availability and reliability, as well as efficient proactive management tools to optimize time to market and minimize service downtime.
ML2300N can be flexibly deployed in Point-to-Multi-Point or Drop and Continue scenarios with Actelis ML600 Hybrid-Fiber Ethernet Switches each delivering symmetrical Ethernet services as well as legacy E1 and V.35 services to remote subscribers/locations over multiple copper pairs.
ML2300N bonds copper pairs together to create a 2Base-TL link implementing the standard IEEE 802.3ah-2004 (EFM) long-reach Ethernet-over-Copper specification. ML2300N incorporates Actelis’ EFMplus and DRB technologies allowing carriers to offer higher bandwidth per pair and longer reach per service in real world environments along with the most stable and reliable transmission links in the industry. Up to 16 HSLs can be supported by the ML2316N, up to 32 by the ML2332N. Any combination of copper pairs per HSL/s can be configured.
1 Gbps
Fiber Ports
Up to 8 copper ports and 2 SFP ports
Up to 8 copper ports
and 2 SFP ports
Harsh
Environments
High Reliability &
Availability
Ultra-
secure
Key Features
ML2300N Mini Ethernet Aggregation Switch
Key Features
ML2300N
Mini Ethernet Aggregation Switch
- Flexible and Cost Effective for space constrained locations and low density scenarios
- High throughput, wide coverage and high reliability
- Scalable for growing networks
- Rapid Service Deployment and Ease of installation
- Advanced Carrier Ethernet capabilities, MEF CE 2.0 compliant services
- Legacy Support and Migration to Eth/IP
- Standards compliant EFM 802.3ah-2BASE-TL platform
- Advanced Synchronization - 2Mhz, 2 Mbps and SyncE
- Binder Friendly - Dynamic Spectral Shaping (DSS) for minimizing spectral impact
- Full Management Suite, including MetaASSIST EMS, easy to use MetaASSIST View GUI
Applications
- Business Ethernet Services
- Business Legacy TDM Services
- Transparent LAN Service
- Fast Internet Access
- Metro Ethernet Extension
- Private Campus Network Intra-Connection
- MDU/MTU Backhaul
- DSLAM Backhaul
- WiFi and Cellular Backhaul (Radio Access Networks)
- Leased Lines Replacement
Markets Served
- Telecommunications Operators (Residential Broadband, Business Ethernet)
- Federal Government Agencies & Military
- State & Local Government Agencies
- Intelligent Traffic Solutions
- Freight and Passenger Railway Networks
- IoT Enabled Sites & Campuses
- Education
- Health Care
- Utilities
Ethernet Aggregation
Over Networks of Fiber and Copper
Product Name | High Level Description |
---|---|
ML2316N | Topology: Point-To-Multi-Point, Point-To-Point, Drop & Continue, ERPS # of copper pairs: 16 Max # of bonded links: 16 Max link capacity (Mbps): 15-240 MEF CE 2.0 Ethernet Copper/SFP: 2+2/1 TDM STM-1: 1 Sync: 2 Mhz, 2 Mbps, SyncE Hardened: Yes |
ML2332N | Topology: Point-To-Multi-Point, Point-To-Point, Drop & Continue, ERPS # of copper pairs: 32 Max # of bonded links: 2*16 Max link capacity (Mbps): 15-240 MEF CE 2.0 Ethernet Copper/SFP: 4+4/2 TDM STM-1: 1 Sync: 2 Mhz, 2 Mbps, SyncE Hardened: Yes |
Summary of Specifications
- Ethernet (Network/User) No. of interfaces SDU model dependant
- 10/100/1000 Base-T: 2 ports (ML2316N) or 4 ports (ML2332N)
- 100/100 Base-T: 2 ports (ML2316N) or 4 ports (ML2332N)
- Connector: RJ-45, Auto-MDIX
- 100/1000Base-FX: 2 ports (ML2316N) or 4 ports (ML2332N)
- Connector: SFP based, MSA compliant
- E1 Port: 16xE1 as uplinks for all E1/V35 traffic. E1 interfaces can aggregate multiple ML2300N units at the same location
- Synchronization
- Clock Source: 5 or 10 x Synchronous Ethernet per G.8261, G.8262 over copper or fiber
- BITS-2MHz or 2Mbps external clock
- Clock Quality: EEC-option1, EEC-option2
- Clock APS: Automatic Protection Switch from Primary to Secondary per GR-1244-CORE
- Reference clock to NTU – Symbol Clock over SHDSL
- Clock Source: 5 or 10 x Synchronous Ethernet per G.8261, G.8262 over copper or fiber
- High Speed Link (Bonded Copper Pairs):
- Protocol: IEEE 802.3ah 2Base-TL
- Line code: ITU-T G.991.2 rev. 2
- Bandwidth per HSL: 1-230 Mbps (symmetrical) up to 15 Mbps per pair, bonding up to 16 pairs.
- Cut line protection – Resiliency to multiple failures
- Number of copper pairs per unit: 16 or 32
- Copper Pairs per HSL: 1-16
- Connector: RJ45 – 2 modems/pairs per connector
- End-to-end Delay: 2-4 ms (typical)
- Spectral Compliance: ITU-T G.991.2 annex A, B, F, G, ETSI TS 101 524 annex E, ANSI T1.417, T1.426 Per-country regulatory compliant spectral
modes - Spectral Friendliness: Dynamic Spectral Shaping (DSS)
- Management (Out-of-Band)
- 10/100Base-T Connector: RJ45, Auto-MDIX
- Craft EIA RS-232 (DCE) Connector: DB9
- Bridging: IEEE 802.1q
- Forwarding Database size: 16K MAC addresses
- MTU: 1518 – 2048 Bytes (configurable per system)
- TPID: up to 4 settable per inner/outer tag
- Aging: Configurable
- Switching Capacity: 8 Gbps non-blocking
- MAC Limiting and Filtering
- Multicast/Broadcast Control
- Port based VLAN Stacking (Q-in-Q)
- Conditional VLAN Stacking
- VLANs: 4K, supports VLAN translations
- L2CP Tunneling
- RSTP, STP: IEEE 802.1d
- Link Aggregation: IEEE 802.3, L2/L3 balancing
- Provider Bridges: IEEE 802.1ad
- LLDP: IEEE 802.1ab
- IGMP Snooping: RFC 4541, V1/V2 RFC
1112/2236 - ERPS: ITU-T G.8032
- EFM OAM: IEEE 802.3ah clause 57 inc. Dying
Gasp - CFM/MEF OAM: IEEE 802.1ag , ITU Y.1731
- Classes of Service (queues per port): 8
- Two Levels Hierarchical Scheduler (H-QOS), up to 64 queues per port, WFQ, SP, Hybrid
- Bandwidth Control: 32 profiles, 2 rate, 3 color metering (CIR, CBS, EIR, EBS)
- EVCs: 32 Services
- Classification: 128 rules (Port/VLAN/L2 L3/L4)
- Shaping: per queue/port
- Color Mode Awareness by COS or DEI
- CoS Marking: by COS or DEI, per Service
- Protocols
- IPV4 and IPV6
- DHCP Client: RFC 2132
- ACS Client, CWMP: TR-069
- Command Line Interface: TL1, CLI
- Remote Access: Telnet
- SNMP: V3, V2C, V1
- Radius Authentication: RFC 2865
- Secure Access (option): SSH v2
- Time Synchronization: SNTP v3
- Web Access: HTTP
- File transfer: FTP, TFTP
- Syslog: RFC 3164
- Applications
- EMS: MetaASSIST™ EMS
- Craft GUI: MetaASSIST™ View
- Terminal Block: 2 Input, 1 Output Physical
- Power
- Status
- Sync
- Alarm
- MLP per modem/pair
- ACT (Activity) – per Ethernet port
- LNK (Link) per Ethernet/HSL port
- Dimensions
- Height: 1.6” / 40mm (1U)
- Depth:
- 11” / 213mm (ML2316N)
- 16.8” / 426 mm (ML2332N)
- Width: 8.4” / 438.55 mm
- Weight:
- 3.75 lbs/ 1.7 Kg (ML2316N)
- 7.5 lbs / 3.4 Kg (ML2332N)
- Mounting Rack:
- 2 units in 19” rack (ML2316N)
- 1 unit in 19” rack (ML2332N)
- Desktop, Wall Mount
- Power
- DC: 24/48 Vdc nominal (20-60 Vdc range),
25-50 Watt (per model) - AC: 90-264 VAC, 47-63 Hz, up to 60 Watt
- DC: 24/48 Vdc nominal (20-60 Vdc range),
- Operating Temp: -40° to +65°C
- Storage Temp: -40° to +70°C
- Relative humidity: Up to 95%, non-cond.
- Metro Ethernet Forum
- CE 2.0
- Safety
- UL 60950, CSA C22.2 60950
- EN 60950-1, IEC 60950-1
- EMC
- FCC Part 15 Class
- ICES-003 Class B
- ETSI EN 300 386 Class B
- ETSI ETS 300 132-2
- ITU-T K.20, K.21
- NEBS
- GR-1089-CORE, GR-63-CORE
- CE
- EMC and Safety
- Environmental
- GR-63-CORE
- ETSI ETS 300 019